ACF-200

ACF-200 is our most commonly purchased product and has the same anti-corrosive properties as ACF-100, but can be used in both spray and trowel applied coatings.

Typical uses: Flake glass is suitable for use in many applications and in a wide variety of surface coatings. Our ACF-200 was developed to form a multi-layer tortuous path for any MVT, significantly reducing the risk from corrosion attack. The most common uses include:

  • Anti-corrosion in chemical plants
  • Liners for water tanks, boiler tanks, floor linings, fish tanks, silos, petroleum tanks, marine cooling pipes
  • Liners for road tankers, containers and vessels, fermentation tanks, reservoirs
  • Bottom plate lining and lower sidewalls for petroleum tanks
  • Pipelines
  • Marine Vessels (Boats, cargo vessels, barges, etc.) coatings - providing durable, long-lasting and robust construction material invulnerable to corrosion and abrasion
  • Automotive Coatings
  • Roof Coatings
  • Coatings of various permanent structures located in oceanic settings, both in the immersion zone and splash zone

Advantages of Glass Flake in Protective Coatings

  • Extend the life of protective coatings
  • Prevention of cracking and peeling
  • Improve wear and corrosion resistance
  • Significantly reduce or eliminate moisture vapor transmission (MVT)
ACF-200/Multipurpose

Product Description:

ACF-200/Multipurpose

Product Designation Nominal Flake Thickness (Microns) Bulk Density (lbs/ft3) Particle Size Distribution (Microns) Surface Treatment Packaging lb (kg)
ACF-200 5 ± 1 42 ± 5 < 106 (20-50%)
106-150(10-30%)
150-300 (15-45%)
300-710 (0-10%)>710(0%)		 None Kraft bag 44lb (20kg)
ACFT*-200 5 ± 1 42 ± 5 Same as ACF-200 Silane see below Same as ACF-200

*Resin Compatibility of Standard Treatments, T1 – Polyurethane: Product code ACF-T1-200, T2 – Vinylester: Product code ACF-T2-200, T3 – Epoxy: Product code ACF-T3-200, T4 – Polyester: Product code ACF-T4-200
Glass composition may vary slightly from batch to batch. *This information is given in good faith without guarantees or liability. All values are approximate

Special Treatments:

Tailored silane treatments may be specified. Ameriflake prides itself on the ability to custom engineer its flake products via manipulations of flake composition, flake physical dimensions, and/or flake surface treatment.

Contact Ameriflake today to learn more about our products, our processes, and how you can partner with a high-quality, American-made flake glass manufacturer. Our experienced staff is ready to help with expert advice, flake glass samples, technical inquiries and more! Contact Ameriflake Today.